If U were born on the 1st, 10th, 19th, 28th of any month U r number 1… If U were born on the 2nd, 11th, 20th, 29th of any month then U r number 2…If U were born on the 3rd, 12th, 21st, 30th of any month then U r number 3…If U were born … Read more
First download the driver from: Samsung driver… then connect to device..
Adding Listen, Whisper, and Barge to FreePBX or Asterisk Listen: Monitor an agents call. The manager can hear both the spied-on and bridged channels, but they cannot hear the manager. Whisper: Whisper to the agent. The manager can hear both the spied-on and bridged channels, and the spied-on channel (agent) can also hear the manager, … Read more
Make sure you have both “enabled = yes” and “webenabled = yes” setup in /etc/asterisk/manager.conf You may also use “httptimeout” to set a default timeout for HTTP connections. Make sure you have a manager username/secret Once those configurations are complete you can reload or restart Asterisk and you should be able to point your web … Read more
exten => _1NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log) exten => _1NXXNXXXXXX,2,Set(CALLFILENAME=${CALLERID(all)}-${EXTEN}-${STRFTIME(${EPOCH},,%Y%m%d-%H%M%S)}) exten => _1NXXNXXXXXX,3,Monitor(wav,${CALLFILENAME},m) exten => _1NXXNXXXXXX,4,Dial(${SIPTRUNK}/${EXTEN},,tTor) exten => _1NXXNXXXXXX,5,Congestion exten => _1NXXNXXXXXX,103,Congestion exten => _011.,1,AGI(agi://127.0.0.1:4577/call_log) exten => _011.,2,Set(CALLFILENAME=${CALLERID(all)}-${EXTEN}-${STRFTIME(${EPOCH},,%Y%m%d-%H%M%S)}) exten => _011.,3,Monitor(wav,${CALLFILENAME},m) exten => _011.,4,Dial(${SIPTRUNK}/${EXTEN},,tTor) exten => _011.,5,Congestion exten => _011.,103,Congestion
; extensions.conf – the Asterisk dial plan ; ; Static extension configuration file, used by ; the pbx_config module. This is where you configure all your ; inbound and outbound calls in Asterisk. ; ; This configuration file is reloaded ; – With the “dialplan reload” command in the CLI ; – With the “reload” … Read more
incoming calls on your standard lines are handled and the greeting message is played ( the_welcome_ class being specified for the queue welcome); let us see how it is defined. MOH is described in /etc/asterisk/musiconhold.conf. When installing Asterisk, this file contains this: [general] [default] mode=files directory=moh You will need to append the following section to … Read more
If you are running a call center on FreePBX or Asterisk, most likely you will want the ability to listen in on agents calls, also known as joining multiple calls, or connected two calls to a manager, or other variations of barging in on a bridged channel. For the purpose of this article, we will … Read more
How to configure the Digium PRI cards in Asterisk or vicidial or Goautodial or vicidialnow or Freepbx If you are using the precompiled iso of asteirsk software like ( trixbox , elastix , pbxinaflash , goautodial , vicibox,) then the Dhadi driver will be by default installed , if not you need to install … Read more