Asterisk Server Consultant
Sample DAHDI installation
After compiling and installing of dahdi and asterisk, you have to perform some further steps to use your hardware.
This example will show you a few steps how to get asterisk and two Digium cards enabled:
1.) Detect your hardware
# (this will generate /etc/dahdi/system.conf and /etc/asterisk/dahdi-channels.conf)
linux:~# dahdi_genconf
2.) Read systm.conf file and configure the kernel
asterisk:~# dahdi_cfg -v
3.) Restart dahdi to unload and reload all modules and drivers
linux:~# /etc/init.d/dahdi restart
4.) Point file chan_dahdi.conf to /etc/asterisk/dahdi-channels.conf
# open chan_dahdi.conf and include it under the section [channels]
#
# NOTE: You can edit and configure /etc/asterisk/dahdi-channels.conf at any time
# to set up your specific options there.
…
[channels]
# include /etc/asterisk/dahdi-channels.conf
…
5.) Restart asterisk
linux:~# /etc/init.d/asterisk restart
5.a) Verify your current system status. You should get some output like this:
asterisk*CLI> dahdi show status
Description Alarms IRQ bpviol CRC4
Wildcard TDM410P Board 1 OK 0 0 0
Wildcard TDM800P Board 2 OK 0 0 0
5.b) Verify your configured channels
linux*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret
pseudo default default
1 from-pstn de default
2 from-pstn de default
3 from-pstn de default
4 from-pstn de default
5 from-pstn de default
6 from-pstn de default
7 from-pstn de default
8 from-pstn de default
9 from-pstn de default
10 from-pstn de default
11 from-pstn de default
12 from-pstn de default
linux*CLI>
It’s perfect time to make some plans for the longer term and it is time to be happy. I have read this put up and if I could I want to recommend you few interesting issues or advice. Maybe you could write next articles referring to this article. I want to read more issues about it!
[url=http://golf.ventego.net/]